LX0-103 Examcollection Question Answer

11 pages
0 downs
57 views

Extension: PPTX

Please download to get full document.

View again

of 11
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Share
Description
CompTIA LX0-103 Exam is a popular Certification Test. We have prepared highest quality Examcollection CompTIA Linux+ LX0-103 practice test to help you pass CompTIA LX0-103 Exam.Our CompTIA Linux+ LX0-103 practice test provides you with practical as well as theoretical knowledge of CompTIA LX0-103 exam objectives. Examcollection CompTIA Linux+ LX0-103 practice test ensures 100% success on your very first attempt. http://examcollection.in/LX0-103-vce-download.html
Tags
Transcript
  • LX0-103 Dumps - CompTIA Linux+ [Powered by LPI] Exam 1 Practice Exam Questions Real Question, 100% Passing Guarantee http://examcollection.in/LX0-103-vce-download.html
  • LX0-103 Dumps - CompTIA Linux+ [Powered by LPI] Exam 1 Practice Exam Questions http://examcollection.in/LX0-103-vce-download.html QUESTION 1 Which SysV init configuration file should be modified to disable the ctrl-alt-delete key combination? A. /etc/keys B. /proc/keys C. /etc/inittab D. /proc/inittab E. /etc/reboot Correct Answer: C
  • LX0-103 Dumps - CompTIA Linux+ [Powered by LPI] Exam 1 Practice Exam Questions http://examcollection.in/LX0-103-vce-download.html QUESTION 2 During a system boot cycle, what program is executed after the BIOS completes its tasks? A. The bootloader B. The inetd program C. The init program D. The kernel Correct Answer: A
  • LX0-103 Dumps - CompTIA Linux+ [Powered by LPI] Exam 1 Practice Exam Questions http://examcollection.in/LX0-103-vce-download.html QUESTION 3 Which of the following are init systems used within Linux systems? (Choose THREE correct answers.) A. startd B. Systemd C. Upstart D. SysInit E. SysV init Correct Answer: BCE
  • LX0-103 Dumps - CompTIA Linux+ [Powered by LPI] Exam 1 Practice Exam Questions http://examcollection.in/LX0-103-vce-download.html QUESTION 4 What information can the lspci command display about the system hardware? (Choose THREE correct answers.) A. Device IRQ settings B. PCI bus speed C. System battery type D. Device vendor identification E. Ethernet MAC address Correct Answer: ABD
  • LX0-103 Dumps - CompTIA Linux+ [Powered by LPI] Exam 1 Practice Exam Questions http://examcollection.in/LX0-103-vce-download.html QUESTION 5 Which of the following commands brings a system running SysV init into a state in which it is safe to perform maintenance tasks? (Choose TWO correct answers.) shutdown -R 1 now B. shutdown -single now C. init 1 D. telinit 1 E. runlevel 1 Correct Answer: CD
  • LX0-103 Dumps - CompTIA Linux+ [Powered by LPI] Exam 1 Practice Exam Questions http://examcollection.in/LX0-103-vce-download.html QUESTION 6 What is the first program that is usually started, at boot time, by the Linux kernel when using SysV init? A. /lib/init.so B. /sbin/init C. /etc/rc.d/rcinit D. /proc/sys/kernel/init E. /boot/init Correct Answer: B
  • LX0-103 Dumps - CompTIA Linux+ [Powered by LPI] Exam 1 Practice Exam Questions http://examcollection.in/LX0-103-vce-download.html QUESTION 7 Which of the following commands will write a message to the terminals of all logged in users? A. bcast B. mesg C. print D. wall E. Yell Correct Answer: D
  • LX0-103 Dumps - CompTIA Linux+ [Powered by LPI] Exam 1 Practice Exam Questions http://examcollection.in/LX0-103-vce-download.html QUESTION 8 Which of the following kernel parameters instructs the kernel to suppress most boot messages? A. silent B. verbose=0 C. nomesg D. Quiet Correct Answer: D
  • LX0-103 Dumps - CompTIA Linux+ [Powered by LPI] Exam 1 Practice Exam Questions http://examcollection.in/LX0-103-vce-download.html QUESTION 9 Which of the following options for the kernel's command line changes the systemd boot target to rescue.target instead of the default target? A. systemd.target=rescue.target B. systemd.runlevel=rescue.target C. systemd.service=rescue.target D. systemd.default=rescue.target E. systemd.unit=rescue.target Correct Answer: E
  • LX0-103 Dumps - CompTIA Linux+ [Powered by LPI] Exam 1 Practice Exam Questions http://examcollection.in/LX0-103-vce-download.html QUESTION 10 Which of the following commands is used to update the list of available packages when using dpkg based package management? A. apt-get update B. apt-get upgrade C. apt-cache update D. apt-get refresh E. apt-cache upgrade Correct Answer: A
  • Related Search
    We Need Your Support
    Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

    Thanks to everyone for your continued support.

    No, Thanks